Lenze PC-based Automation Industrial PC User Manual
Page 69
Advertising
2.5 EN - 01/2012
L
69
Industrial PC | Parameter setting & configuration
IPC backup & restore
Backup procedure
How to carry out a backup:
1. Configure USB stick with »IPC Backup & Restore« for Windows® XP.
2. Switch off the Industrial PC.
3. Connect the USB stick to the switched-off Industrial PC.
4. Restart the Industrial PC.
• The Industrial PC recognises the USB stick and evaluates the control file.
Note!
The backup is carried out automatically if the Record new backup option under
Windows® XP is used.
In this case the following steps are unnecessary
5. Calibrate the touch display:
• The IPC Backup & Restore dialog appears.
6. Click the Backup button.
• The data are stored on the USB stick. A progress bar signals the backup process.
Advertising