Industrial pc | parameter setting & configuration, Interface parameters of the card in slot 2 – Lenze PC-based Automation Industrial PC User Manual
Page 212
Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
212
L
2.5 EN - 01/2012
Interface parameters of the card in slot 2
C1578
C1580
C1581
C1582
C1583
C1584
C1586
Parameter | Name:
C1578 | Apply IP configuration
Data type: UNSIGNED_16
Index: 22997
d
= 59D5
h
Code for activating the set configuration. The interface is activated by writing a "1".
Selection list
(Lenze setting printed in bold)
Information
1 Activate device
0 No command
;
Read access ; Write access CINH PLC STOP ; No transfer
Parameter | Name:
C1580 | Dhcp
Data type: UNSIGNED_32
Index: 22995
d
= 59D3
h
Activation of the configuration. DHCP states:
• "0" = Inactive
• "1" = Active
If DHCP is active, the codes 21-25 do not have any function
Setting range
(min. value | unit | max. value)
Lenze setting
0
1 1
;
Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1581 | IP address
Data type: VISIBLE_STRING
Index: 22994
d
= 59D2
h
IP address of the card
;
Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1582 | Subnet mask
Data type: VISIBLE_STRING
Index: 22993
d
= 59D1
h
Subnet mask of the card
;
Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1583 | Default gateway
Data type: VISIBLE_STRING
Index: 22992
d
= 59D0
h
Default gateway of the card
;
Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1584 | Domain
Data type: VISIBLE_STRING
Index: 22991
d
= 59CF
h
Domain name of the card
;
Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1586 | MAC address
Data type: VISIBLE_STRING
Index: 22989
d
= 59CD
h
MAC address (6 8-bit hexadecimal numbers) (e.g. 00:af:13:42:01:a8)
;
Read access Write access CINH PLC STOP No transfer