Lenze PC-based Automation Industrial PC - Manual (Page 81)

2.5 EN - 01/2012
L
81
Industrial PC | Parameter setting & configuration
Replacing the Industrial PC
Adapting the »Engineer« project
11.3 Adapting the »Engineer« project
The »Engineer« project has to be adapted if you do not use the same Industrial PC type and
the same equipment.

How to replace the Industrial PC in the »Engineer« project:
1. Highlight the old Industrial PC, e.g. EL 9700, in the project tree.
2. Select Replace component... from the right mouse button menu.
• Only the Industrial PCs which are compatible to the old one are displayed.
3. Click OK to replace the Industrial PC.
• Configured slots, control configurations and application data are maintained.