1 identification – Lenze PC-based Automation Industrial PC User Manual
Page 20
Advertising
Industrial PC | Parameter setting & configuration
Commissioning
Identification
20
L
2.5 EN - 01/2012
4.1
Identification
Every Industrial PC is provided with a nameplate containing the device data. The device
data is required for being able to select the IPC in the »Engineer« corresponding to the
hardware components installed.
The Industrial PC can be identified by means of the nameplate.
The nameplate contains information on the components installed which is required for
initial commissioning.
Note!
Here the documentation provides some general information on the
commissioning of an Industrial PC. Depending on the design and version of the
Industrial PC, the commissioning can vary.
Advertising