Lenze PC-based Automation Industrial PC - Manual (Page 34)

Industrial PC | Parameter setting & configuration
Commissioning
Configuring the Industrial PC
34
L
2.5 EN - 01/2012
4.5.4 Establishing Windows® CE access rights
In order to be able to establish a connection to the Industrial PC, each user must be
allocated access rights. For this the respective user has to be set up as a Windows® CE user
with a user name and a password. Windows® CE users can be set up via the »WebConfig«
and the »Engineer«:
 Setting up Windows® CE users in the »WebConfig«
( 34)

Setting up Windows® CE users in the »Engineer«
( 35)
4.5.4.1 Setting up Windows® CE users in the »WebConfig«
 Up to ten Windows® CE users can be set up in the »WebConfig« in the User
management area.
 In codes 101 to 169 the user name, password, and various authorisations are set up for
a maximum of ten users.
The representation for user 1 is displayed. Users 2 to 10 are represented analogously.
Detailed information on the parameters can be found in the following section:
 Parameters of standard devices
( 129)

Note!
You have to be set up as Windows® CE user to have authorisations for further
services like FTP, telnet, or web server access.