Lenze PC-based Automation Industrial PC - Manual (Page 71)

2.5 EN - 01/2012
L
71
Industrial PC | Parameter setting & configuration
IPC backup & restore
Restore procedure
9.6 Restore procedure
A backup stored on a USB stick can be copied to the CF card with the »IPC Backup &
Restore« tool. This process is referred to as "restore".

How to carry out a restore:
1. Connect the USB stick with the backup files to the Industrial PC.
2. Restart the Industrial PC.
• The Industrial PC recognises the USB stick and evaluates the control file.
Note!
The restore is carried out automatically if the Restore backup selected option under
Windows
® XP is used.
In this case the following steps are unnecessary.
3. Carry out the calibration  Touch display calibration
( 31)
.
• The IPC Backup & Restore dialog appears.
4. Select the required backup packet from the selection list.
5. Click the Restore button.
• The data are written to the CF card in the Industrial PC. A progress bar
represents the restore process.

Note!
During the restore process the data on the CF card are overwritten!