5 system structure, 1 engineering pc, 2 industrial pc – Lenze PC-based Automation Industrial PC User Manual
Page 36: System structure
Industrial PC | Parameter setting & configuration
System structure
Engineering PC
36
L
2.5 EN - 01/2012
5
System structure
This chapter gives you an overview of the general system structure in control technology.
5.1
Engineering PC
The Engineering PC serves to:
– parameterise, configure and maintain the IPC: »WebConfig«, »Engineer«),
– parameterise, configure, and maintain the field devices connected
(»Engineer«, »Global Drive Control«),
– program the IPC (»PLC Designer«),
– creating a visualisation project (»VisiWinNET®«)
– the backup/restore preparation with »IPC Backup & Restore«.
5.2
Industrial PC
The following programs run on the Industrial PC:
– the control software (L-force Logic, L-force Motion),
– the fieldbus drivers,
– the optional visualisation software, and
– additional services (data manager, web server, logbook).
Further information can be found in the respective documentation of the
corresponding Engineering software.