Vaisala Hydromet Data Collection Platform - Manual (Page 100)

User's Guide ______________________________________________________________________
98 __________________________________________________________________ M210933EN-C
Submersible Pressure Sensor PAA-
36XW
PAA-36WX is a submersible pressure sensor for water level
measurement with RS485 digital interface, absolute pressure version.
The sensor is based on the stable, piezoresistive transducer and micro-
processor electronics with an integrated 16-bit A/D converter. It is
applied when the atmospheric pressure is measured by a separate
barometer and when the water level is calculated as the difference
between the absolute value and the ambient pressure.
To configure PAA-36XW, proceed as follows:
1. Open an existing setup in the Setup view or create a new one.
2. Proceed to the Additional sensors view.
3. Select PAA-36XW from the Available list and click the Add
button to insert the sensor into the setup.
4. Select the port in the Options frame and check the given default
values for parameters.
1007-036 Figure 49 Configuring PAA-36XW