Log file sending with ftp, Figure 199 ftp settings tab – Vaisala Hydromet Data Collection Platform User Manual
Page 374
User's Guide ______________________________________________________________________
372 _________________________________________________________________ M210933EN-C
Log File Sending with FTP
Log files can be sent to an FTP server using the iConnector and a
modem. When using this feature, the log files of the previous day are
automatically sent every day after midnight.
To use this feature, proceed as follows:
1.
Configure the iConnector and modem as described in section
Report Transmission Configuration on page 144
.
2.
To send the Log files to an FTP server, create a log group in the
Logging view, and add the items to be logged.
3.
Select the FTP tab in the Configure Log Group frame, as shown
in
.
0606-070
Figure 199
FTP Settings Tab
4.
Select Upload logs via FTP and give the following parameters:
a.
Destination: This is the FTP server name followed by an
optional path to which the files will be sent. For example,
when entering ftp.vaisala.com/data the reports are sent to
directory data under user's home directory in the
ftp.vaisala.com server.
b.
Use station name in ftp server path: When this option is
selected, the log files will be placed in subdirectories with
station names. For example, the full storage path for station
MAWS1 would be: ftp.vaisala.com/data/MAWS1.
NOTE
The iConnector firmware does not support the creation of directories;
thus the specified directory has to exist in the destination FTP server.