Vaisala Hydromet Data Collection Platform - Manual (Page 57)

Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA_______________________________________________________________________ 55
4. In the Transmit control frame, select Transmit control enabled
and set the timing as follows in the editable text boxes (see
Figure
19 on page 55 ):
- Start delay (ms): 30
- End delay (ms): 10
0711-116 Figure 19 Optional Hardware View: Configuring
Communication Port for Nokeval 7470 (2/2)
5. In the Configure frame, leave the default values.