Vaisala Hydromet Data Collection Platform - Manual (Page 229)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 227
0811-027 Figure 101 FTP Client Configuration
The FTP client configurable parameters are presented in Table 30 on
page 227 .
Table 30 FTP Client Parameters
Parameter Use Note
Destination server FTP server to which data will be
sent
Server username Username for the FTP server
Server password Password for the FTP server The password is displayed as
asterisks in Lizard Setup
Software.
Primary interface Primary communication interface
used for connecting to the server
Secondary interface Secondary communication
interface used for connecting to
the server. This will be used in
case of connection failure in the
primary one.
Queue location File system location where
outgoing reports will be queued
for transmission. The available
locations are: RAM-disk,
External CFS,
1 2
and Internal
logfile system. 2
Specify the same location for all
FTP clients in the setup.