Vaisala Hydromet Data Collection Platform User Manual
Page 329
Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 327
9.
Add user credentials for dialing in to the QML logger by selecting
Parameter Sets from the Setup menu. See
.
0710-127
Figure 166
Parameter Set for Dial-In User Credentials
a.
Add a new parameter to the pre-defined group pppclients.
b.
Name the parameter set using the format
<username>:password, where <username> is the user name
to be used and password the fixed key for the user’s password
not to be changed.
c.
Select Text as the parameter type in the Data type menu.
d.
Enter the user’s password as the value of the parameter in the
Value field.
10. Your setup is now ready for testing. You can test the setup as
follows:
a.
The daily file containing report data is updated every five
minutes.
b.
You can access the QML logger service interface from the
data acquisition PC by connecting to IP address 10.0.0.2, port
50000.