Vaisala Hydromet Data Collection Platform - Manual (Page 142)

User's Guide ______________________________________________________________________
140 _________________________________________________________________ M210933EN-C
Dial Attempts
The Dial attempts parameter defines the maximum number of dial
attempts to be made before canceling the transmission due to an
unreachable destination number, caused by, for example, a busy line.
Send Delay
The Send delay parameter defines the time in seconds to be waited after
establishing the connection before sending data.
Disconnect Delay
The Disconnect delay parameter defines the time in seconds the line is
kept open after the last report is sent from the QML logger to the
modem. This time must be long enough to ensure that all the data has
been sent by the modem.
Inactivity Timeout
In certain applications, it may be desirable to allow external, for
example, service access to the QML logger through the modem. The
Inactivity timeout parameter defines the time in seconds the line is
allowed to stay idle before shutting the modem down. The setting 0
disables the operation.
NOTE This parameter is only available on the Advanced user level.