Vaisala Hydromet Data Collection Platform - Manual (Page 370)

User's Guide ______________________________________________________________________
368 _________________________________________________________________ M210933EN-C
Destination
The value for the Destination parameter depends on the selected
transmission mode as follows:
- Phone number for the data call and SMS transmission.
- E-mail address for the E-mail transmission.
- FTP server name followed by the optional path for the data. For
example, when entering ftp.vaisala.com/data the reports are sent to
directory data under user's home directory in the ftp.vaisala.com
server. In addition, the Station name as path extension option can
be used to place files in subdirectories with station names. For
example, the full storage path for station MAWS1 would be
ftp.vaisala.com/data/MAWS1.
The Destination parameter either sets the phone number or gives the
name of the Station setting parameter that contains the phone number.
User Information
The User information parameter is required only for FTP transmission.
The format for User information is:
<username>,<password>
Example:
maws1,weatherpass1
You may either set the appropriate value directly or specify the name of
the Station setting parameter containing the value.
NOTE The iConnector firmware does not support the creation of directories;
thus the specified directory has to exist in the destination FTP server.
where
username
= Valid username for the destination FTP server
password = Valid user password for the FTP server