Vaisala Hydromet Data Collection Platform - Manual (Page 263)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 261
DynDNSConn, an additional virtual connection, is a connection that the
client uses for contacting the defined Dynamic DNS service. Normally,
there is no need to make any configuration for it.
Table 43 Station-Specific Settings for Dynamic DNS Client
Parameter Use Note
user User name to use when
updating IP to service. User account must be
established prior to
using. Otherwise, the
client device may end
up blacklisted.
pass Password for the user.
name Hostname to update. For
example, testaws.dyndns.org.
Table 44 Configuration Parameters for Dynamic DNS Client
Parameter Use Note
Host address Name or address of the
Dynamic DNS host running
the service.
IP port IP port in the host system. By
default, Dynamic DNS uses
HTTP port 80.
Communication
interface Interface to use for the
connection.
Timeout Timeout [ms] for connecting
the host.
Retries In case of failure, the number
of retries for attempting host
connection.
Debug Produce additional informative
output to COM0.