Table 65, Operator-dependent parameters for gprs connections – Vaisala Hydromet Data Collection Platform User Manual

Page 305

Advertising
background image

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry

VAISALA______________________________________________________________________ 303

d.

Enable answering incoming calls by selecting the Accept
incoming
option.

2.

In the Communication interfaces view, add and configure a
communication interface for the modem as shown in

Figure 143 on

page 303

.

0710-112

Figure 143

Configuring Network Interface for GSM/GPRS
Modem

a.

Click New to add a new interface.

b.

Change the settings for the new interface (netif0) as required.
The most common operator-dependent settings for a GPRS
connection are presented in

Table 65 on page 303

.

NOTE

The PIN code value presented here is only an example. Ensure that a
proper PIN code is used; otherwise, the SIM card in the modem will
be locked with the PUK code after three failed PIN entries.

Table 65

Operator-Dependent Parameters for GPRS
Connections

Parameter

Use

apn

Network access point name

username

User name for network access

password

Password for network access

Advertising