Vaisala Hydromet Data Collection Platform - Manual (Page 373)

Appendix A _____________________________________ Configuration Information for Legacy Items
VAISALA______________________________________________________________________ 371
ISP User Information
The ISP User information parameter (ISP = Internet Service Provider)
is required only when accessing Internet using PSTN or GSM data. The
format for ISP User information is:
<username>,<password>
Example
maws1,weatherpass1
You may either set the appropriate value directly or specify the name of
the Station setting parameter containing the value.
Use Passive Mode FTP
When this option is selected, iConnector uses passive mode FTP
sessions. PASV is then used instead of PORT when opening an FTP
session. This should generally not be selected, but it may be required in
some firewalled environments. For a detailed description of this feature,
refer to the FTP standard (RFC 959).
NOTE The ISP eMail system sends all delivery error messages and problem
reports to the given eMail Return address. You may utilize this
feature for troubleshooting purposes: set, for example, your own eMail
address as the eMail return address and you will receive information
about the failed messages. However, with this feature you cannot solve
problems that occur before the data reaches the eMail system, such as
GPRS connection problems.
where
username = Valid username for the destination ISP account
password = Valid user's password for the destination ISP
account