Vaisala Hydromet Data Collection Platform - Manual (Page 203)

Chapter 5 __________________________________________ Configuring TCP/IP-Based Telemetry
VAISALA______________________________________________________________________ 201
CHAPTER 5
CONFIGURING TCP/IP-BASED
TELEMETRY
This chapter provides instructions for configuring TCP/IP-based
telemetry options.
Configuration Buildup
Hardware and protocol layers of the TCP/IP implementation form a
network setup. The configuration for the network setup can come from
the following sources:
- Setup file for the QML logger
- Static parameters groups (values can be set via AWS Client at
runtime)
- Network configuration protocols (TCP/IP behavior configured via
the network itself)
- Configurations of devices other than the QML logger
NOTE Configuring TCP/IP-based telemetry requires a working knowledge of
TCP/IP networking. This User’s Guide only describes configuration
carried out at the QML logger, and does not attempt to provide general
guidelines for designing TCP/IP-based networks.