Vaisala Hydromet Data Collection Platform - Manual (Page 161)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 159
GOES Interface
GOES Satellite Transmitters
To set the GOES satellite transmitters to operate with the QML logger,
you first need to configure serial communications, data collection, data
formats, and other settings with Lizard Setup Software. After this, you
have to configure the transmitter-specific settings using the AWS Client
software. You may also activate the GOES random and emergency
transmissions on the secondary channels. The primary and secondary
transmissions can be used simultaneously. The setup procedure for both
the GOES primary and secondary transmissions is described in the
following sections.
The QML logger has been tested with the Signal Engineering
transmitter referred to as QST101/QST102 option in the device list of
the Lizard setup software.