Vaisala Hydromet Data Collection Platform - Manual (Page 165)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 163
Report Setup for the Primary Transmissions
All data that will be sent by the satellite transmitter must first be
included in a log group and then correctly formatted.
1. First create a new log group in the Logging view, and select all the
data items that will be included in the primary transmission report.
The variables will be sent in the same order as they are selected.
2. Under the Reporting tab in the Type field, select whether the data
is to be sent in scan or channel ordered report format. Scan ordered
format means that each data record will be sent as stored in the log
group, ending with the latest record. Channel ordered format
means that all measured values of the first data item will be sent
first, then all values of the second data item, and so on. The latest
measured value will always be the last one in the message. An
example of the two formats, when temperature, humidity, and air
pressure are measured, is as follows:
Scan Ordered
23.4 76 1023.7
23.5 76 1023.7
23.5 77 1023.7
23.5 77 1023.8
Channel Ordered
23.4 23.5 23.5 23.5
76 76 77 77
1023.7 1023.7 1023.7 1023.8