Figure 41, Adding ec-5 measurement – Vaisala Hydromet Data Collection Platform User Manual
Page 89
Chapter 3 _____________________________________________ Configuring Modules and Sensors
VAISALA_______________________________________________________________________ 87
To configure the soil moisture sensor in Lizard, proceed as follows:
1.
Open an existing setup in the Setup view or create a new one.
2.
Proceed to the Sensors view.
3.
Select the EC-5 sensor from the Available list and click the Add
button to insert the sensor into the setup. Lizard automatically
suggests channel 1 for the measurement.
1007-032
Figure 41
Adding EC-5 Measurement
4.
If the connector or connectors are used, Lizard prompts "Selected
HW resource is already in use. Are you sure you want to make this
connection".
a.
Select No.
b.
Double-click the text <None> in the Connector column.
c.
Select the available connector. Valid connectors are
CH0 ... CH3.