Vaisala Hydromet Data Collection Platform - Manual (Page 185)

Chapter 4 ________________________________________________ Configuring Telemetry Options
VAISALA______________________________________________________________________ 183
0711-168 Figure 78 Autotrac Device Configuration
Table 22 Lizard Parameters for the Autotrac Transceiver
Parameter Value Description
Timeout 2000 ... 30000 ms Timeout for QML logger to
transceiver communications.
Time
tolerance -1 = Disable 1 ... 3600 s When the current system time
differs from the GPS time more
than the tolerance set with this
parameter, the system time is
adjusted to match the GPS time.
Options
(available only
on Advanced
user level) Restart message
numbering Resets message sequence
numbering on startup.
Simulated
transmissions Makes simulated transmissions
(tests RS-232 interface).
Priority transmissions Uses high priority transmission.
Process inbound
messages Processes inbound messages as
remote commands.
Send responses to
commands Sends responses to the received
commands.
Extra op. info to COM0 Sends additional printouts to
COM0 for troubleshooting.
Allow blank CRC Test function; not for application
use.
Command
parser
(available only
on Advanced
user level) Empty, <None> or
Extparser Parser used to process remote
commands.