Hal2 transmitter configuration – Vaisala Hydromet Data Collection Platform User Manual
Page 198
User's Guide ______________________________________________________________________
196 _________________________________________________________________ M210933EN-C
HAL2 Transmitter Configuration
To configure the HAL2 SCD/ARGOS transmitter for use, proceed as
follows:
1.
On the QML logger, connect the HAL2 transmitter to port
DSU232_0_0.
2.
On the QML logger, connect your PC to port COM0.
3.
Using HyperTerminal or other such program on your PC, open a
maintenance connection to the QMS logger (AWS Client may not
show escape sequences correctly; therefore, it is recommended that
you use HyperTerminal or an equivalent program).
4.
Give the following command:
HAL2 enter
5.
Redirect the maintenance connection to HAL2 by giving the
following command:
open DSU232_0_0
6.
Display the HAL2 menu, press ENTER. The following menu is
displayed:
MODE REGLAGE USINE
Software:4.03 [00000000]
A REGLAGE DE LA FREQUENCE
B REGLAGE DE LA PUISSANCE RF
C REGLAGE DE LA MODULATION
D DEBUG CARTE
E TCXO
F PARAMETRES EMISSIONS
G SEQUENCE EMISSIONS
H DOWNLOAD
I UPLOAD
J AUTORISER BOOTLOADER
K RAFRAICHIR INFO
L NUMERO DE SERIE
Tapez [X] pour sortir