Xantrex Technology XDC 20-600 - Manual (Page 105)

Power Supply Operation
TM-XDOP-01XN 3–43
Configure Display
The DISPLAY CONFIG menu option allows you to select the readback values
displayed when the power supply is operating in its default state.
The factory default is to display voltage and current readback, but you can also
choose voltage and power, current and power, or voltage, current, and power.
This table shows how to access and work with the DISPLAY CONFIG option.
Step # Do This You Will See
1 ERROR MSGS
2
until you see the “DISPLAY CFG”
option
a
a. You can also press MENU repeatedly to bring up the Display Config option.
DISPLAY CFG
3 Show V and I
4
Using the arrow keys, select from
Show V and I and Show V and P.
Show V and I
5 The setting is saved.
MENU

ENTER

ENTER
TM-XDOP-01XN.book Page 43 Monday, July 17, 2006 11:19 AM