Xantrex Technology XDC 20-600 - Manual (Page 244)

SC
PI Co
mmand Re
fe
ren
ce
C–20
TM-XDOP-01XN
Table C-10 Status Commands
Function SCPI Command Description Query
Power On Status
Clear (*PSC) [:]STATus[<channel>]:POSClear <on-off-state> Controls the automatic power-on
clearing of the Service Request
Enable Register, Standard Event
Status Enable Register, Parallel
Poll Enable Register and other
event enable registers Yes
Query Operation
Status Condition
Register [:]STATus[<channel>]:OPERation:CONDition? See Table 4-9 on page 4–46. N/A
Set Operation Status
Enable Register [:]STATus[<channel>]:OPERation:ENABle <status-
enable>
See Table 4-9 on page 4–46. Yes
Query Operation
Status Event
Register [:]STATus[<channel>]:OPERation[:EVENt]? See Table 4-9 on page 4–46. N/A
Set Operation Status
Negative Transition
Register [:]STATus[<channel>]:OPERation:NTRansition
<status-enable>
See Table 4-9 on page 4–46. Yes
Set Operation Status
Positive Transition
Register [:]STATus[<channel>]:OPERation:PTRansition
<status-enable>
See Table 4-9 on page 4–46. Yes
Query Operation
Status Current
Sharing Condition
Register [:]STATus[<channel>]:OPERation:CSHare:CONDitio
n?
See Table 4-14 on page 4–50. N/A
Set Operation Status
Current Sharing
Enable Register [:]STATus[<channel>]:OPERation:CSHare:ENABle
<status-enable>
See Table 4-14 on page 4–50. Yes
Query Operation
Status Current
Sharing Event
Register [:]STATus[<channel>]:OPERation:CSHare[:EVENt]? See Table 4-14 on page 4–50. N/A
TM-XDOP-01XN.book Page 20 Monday, July 17, 2006 11:19 AM