Xantrex Technology XDC 20-600 User Manual
Page 196
Specifications and Characteristics
A–4
TM-XDOP-01XN
Table A-3 Specifications for 12000 Watt units (10V to 60V Models)
Models
10-1200
20-600
30-400
40-300
60-200
Output Ratings:
Output Voltage
a
Output Current
b
Output Power
a.
Minimum output voltage is <0.3% of rated voltage at zero output setting.
b.
Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–10 V
0–1200 A
12000 W
0–20 V
0–600 A
12000 W
0–30 V
0–400 A
12000 W
0–40 V
0–300 A
12000 W
0–60 V
0–200 A
12000 W
Line Regulation:
c
Voltage
(0.01% of Vmax)
Current (0.1% of Imax)
c.
For input voltage variation over the AC input voltage range, with constant rated load.
1 mV
1200 mA
2 mV
600 mA
3 mV
400 mA
4 mV
300 mA
6 mV
200 mA
Load Regulation:
d
Voltage (0.05% of Vmax + 5 mV)
Current (0.2% of Imax + 40 mA)
d.
For 0–100% load variation, with constant nominal line voltage.
10 mV
2440 mA
15 mV
1240 mA
20 mV
840 mA
25 mV
640 mA
35 mV
440 mA
Meter Accuracy:
Voltage (0.15% of Vmax)
Current (0.5% of Imax)
15 mV
6 A
30 mV
3 A
45 mV
2.0 A
60 mV
1.5 A
90 mV
1 A
Output Noise (0–20 MHz):
Voltage (p–p)
75 mV
75 mV
75 mV
75 mV
100 mV
Output Ripple (rms):
Voltage
Current
e
e.
Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
10 mV
6200 mA
10 mV
3200 mA
12 mV
2000 mA
15 mV
1500 mA
15 mV
900 mA
OVP Adjustment Range:
(0% to 103% of Vmax)
0–10.3 V
0–20.6 V
0–30.9 V
0–41.2 V
0–61.8 V
Efficiency:
f
f.
Typical efficiency at nominal input voltage and full output power.
0.85
0.87
0.87
0.87
0.89
Drift (30 minutes):
g
Voltage (0.04% of Vmax)
Current (0.6% of Imax)
g.
Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
4 mV
7200 mA
8 mV
3600 mA
12 mV
2400 mA
16 mV
1800 mA
24 mV
1200 mA
Drift (8 hours):
h
Voltage (0.02% of Vmax)
Current (0.05% of Imax)
h.
Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
2 mV
600 mA
4 mV
300 mA
6 mV
200 mA
8 mV
150 mA
12 mV
100 mA
Temperature Coefficient:
i
Voltage (0.04% of Vmax/°C)
Current (0.06% of Imax/°C)
i.
Change in output per
°C change in ambient temperature, with constant line and load.
4 mV
720 mA
8 mV
360 mA
12 mV
240 mA
16 mV
180 mA
24 mV
120 mA
TM-XDOP-01XN.book Page 4 Monday, July 17, 2006 11:19 AM