Xantrex Technology XDC 20-600 - Manual (Page 90)

Operation
3–28 TM-XDOP-01XN
To access and work with the USER LINES menu option:
Aux line B has been selected to be configured.
To configure Aux line B:
Step # Do This You Will See
1 ERROR MSGS
2
a
a. You can also press MENU again to bring up the AUX LINES option.
USER LINES
3 Aux line A
4
or to select which line to
configure.
Aux line B
5 Cfg None
MENU

ENTER
 
ENTER
Step # Do This You Will See
1
Press repeatedly until the desired
option appears. For this example, CV is
selected.
Cfg CV
2 Pol Act High
3
Press repeatedly until the desired
option appears.
Select either “Act High” (Active high logic)
or “Act Low” (Active low logic) for the
auxiliary lines. In this example, Active Low
is selected.
Pol Act Low
4 This setting is saved and
the display returns to its
default operating mode.

ENTER

ENTER
TM-XDOP-01XN.book Page 28 Monday, July 17, 2006 11:19 AM