Xantrex Technology XDC 20-600 - Manual (Page 234)

SC
PI Co
mmand Re
fe
ren
ce
C–10
TM-XDOP-01XN
Table C-1 IEEE 488.2 Commands
Function SCPI Commands Description Query
Clear Status *CLS
[:]STATus[<channel>]:CLEAr
Clears the status data structures. N/A
Standard Event
Status Enable Query *ESE?
[:]STATus[<channel>]:STANdard:ENABle
Query the Standard Event Status
Enable register settings. N/A
Standard Event
Status Enable *ESE
[:]STATus[<channel>]:STANdard:ENABle <ESE-
word>
Set the Standard Event Status
Enable Register bits. N/A
Standard Event
Status Register
Query *ESR?
[:]STATus[<channel>]:STANDard[:EVENt]?
Query Standard Event Status
Register. N/A
Identification Query *IDN?
[:]SYSTem[<channel>]:IDENtify?
Query identification string.
(Manufacturer’s information.) N/A
Individual Status
Query *IST? Reads the current state of the
IEEE 488.1 defined "ist" local
message in the device N/A
Operation Complete
Command *OPC Causes the device to generate the
operation complete message in the
Standard Event Status register
when all pending selected device
operations have finished N/A
Query Operation
Complete
Command *OPC? Place and ASCII character “1”
into the output queue when all
pending operations have been
finished. See IEEE 488.2-1992
section 12.5.3. N/A
Option
Identification Query *OPT?
[:]SYSTem[<channel>]:OPTIon
Identify reportable device options N/A
Parallel Poll Enable
Register Query *PRE? Query the Parallel Poll Enable
Register setting N/A
Parallel Poll Enable
Register Command *PRE <status-enable> Sets the Parallel Poll Enable
Register bits. See IEEE 488.2
section 11.6 for details. N/A
TM-XDOP-01XN.book Page 10 Monday, July 17, 2006 11:19 AM