Xantrex Technology XDC 20-600 - Manual (Page 280)

Index
IX–4 TM-XDOP-01XN
MODEL INFO 3–7
PON CONFIG 3–6
POWER SETPT 3–6
REMOTE CONFIG 3–6
REMOTE SELECT 3–6
S/D RECOVERY 3–6
SETPT LIMIT 3–7
SLEW RATE 3–7
USER LINES 3–6
MENU key 1–6
MODEL INFO (menu item) 3–7, 3–50
model information, viewing 3–50
multichannel
commands 4–15
configuration 4–12
connections 1–2
control mode described 1–12
operation 1–11, 4–14
setup 4–13
multiple loads, connecting 2–19
N
noise and impedance on lines 2–17
normal operation operating state 3–3
numeric keypad, described 1–6
O
operating states
calibration 3–3
normal operation 3–3
output shutdown 3–3
power-on 3–3
soft start 3–3
operation
control modes 1–12
overview 1–12
power on 1–12
operation (local control mode) 3–2
powering off 3–2
powering on 3–2
operation complete event error D–6
OTP display annunciator 1–10
OUT OFF display annunciator 1–10
OUT ON display annunciator 1–10
OUT ON/OFF key 1–5, 3–6
output
enabling 4–26
setting current 3–8
setting power 3–9
output shutdown operating state 3–3
output wires
fastening 2–19
illustrated 2–19
over-temperature protection
auto-recovery 3–15
latched 3–15
OVP display annunciator 1–10
P
Pause display annunciator 1–10, 3–42
PON CONFIG (menu item) 3–6
power bar graph 1–9
power limit, setting 3–48
power on 1–12
power on settings
auto sequence 3–32
configuring 3–29
factory preset 3–30
last setting 3–32
user setting 3–31
power on test 2–13
power output setpoint 3–9
power output, viewing 3–51
POWER SETPT (menu item) 3–6
powering off 3–2
powering on 3–2
power-on operating state 3–3
programming capability 1–2
proof of purchase WA–4
PROT SET key 1–5, 3–6
protection 3–10
AC off 4–33
clearing 4–33
fold 3–14, 4–32
over current (OCP) 3–12, 4–30
over power (OPP) 3–13, 4–31
over temperature (OTP) 4–32
over voltage (OVP) 3–11, 4–29
shutdown recovery 3–15
under current (UCP) 3–12, 4–30
under power (UPP) 3–13, 4–31
under voltage (UVP) 3–11, 4–29
purchase date WA–4
TM-XDOP-01XN.book Page 4 Monday, July 17, 2006 11:19 AM