Xantrex Technology XDC 20-600 - Manual (Page 44)

Installation
2–6 TM-XDOP-01XN
Ventilation
Allow cooling air to reach the ventilation inlets on the front of the unit and allow
4 in. (10 cm) of unrestricted air space at the rear of the unit for the fan exhaust.
Ventilation inlets are located on the top and sides; they are not required, however,
and may be blocked, if required.
See “Specifications and Characteristics” on page A–1 for the operating ambient
temperature range.
Figure 2-3 Mounting the Power Supply in the Rack With Support Rails
a
(6000 W shown)
a. Available from rack or cabinet vendors (e.g. Schroff, part number 30150-094).
TM-XDOP-01XN.book Page 6 Monday, July 17, 2006 11:19 AM