Xantrex Technology XDC 20-600 - Manual (Page 32)

About The XDC Power Supply
1–6 TM-XDOP-01XN
9 RECALL settings key: Apply stored power supply settings.
10 EXIT key: Cancel operation, exit menu or get out of Calibration
mode or Auto Sequence mode. Automatic timeout will also cancel
operation except calibration and auto sequence operation.
11 Numeric keypad: Numbers 0 to 9, used for data entry.
12 Decimal key: Enter a decimal. Used for data entry.
13 CE key: Clear the entire data field. Used for data entry. In Store
User Setting mode, used to delete selected setting or program.
14 Up arrow key
: Scroll through menus and lists, or, in data entry
mode, increase the displayed value. In default operating mode, use
this key to view the output power. In Auto Sequence Operating
mode, use this key to view present sequence number, step
numbers, and sequence loop count.
15 Down arrow key
: Scroll through menus and lists, or, in data entry
mode, decrease the displayed value.
16 ENTER key: Select a menu item or accept data.
17 MENU key: Access all menu functions.
Table 1-3 Item Descriptions for Figure 1-3
Item Description
TM-XDOP-01XN.book Page 6 Monday, July 17, 2006 11:19 AM