Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 169
When the authentication screen is displayed, enter the user name and password of the machine that is
registered to the LDAP server, and press [Apply].
6
Select the user to register to the Address Book.
➠
The name and destination are entered in the registration screen of the Address Book.
5
Set the fax sending details, as needed.
If a fax number was registered in Step 4, set the details when a send error occurs or it takes time to send a
fax to that number.
If you registered something other than a fax number, this step is not required. Proceed to Step 6.
1
Press [Fax Number] [Set Details].
2
Set the items, and press [Apply].
[ECM TX] *1
When an error occurs for an image being sent, the machine corrects the image so as not to send a
distorted image.
[TX Speed] *1
If it takes time to start sending a fax, such as when there is a poor phone line connection, the machine
lowers the communication start speed.
[Long Distance]
If a communication error occurs when sending a fax to an international destination, select [International
(1)]. If the error does not improve, select [International (2)] and [International (3)] in that order.
*1
If this is not set here, the settings that appear when selecting [Menu] in the [Home] screen and then selecting
[Function Settings] are applied.
6
Press [Register As], and select [Favorites] or [Coded Dial].
When [Coded Dial] is selected, select an unregistered number, or press [Use Numeric Keys] and enter a
three-digit Coded Dial number.
7
Press [Apply].
➠
The destination is registered to the Address Book.
Registering a Destination from the TX Job Log of a Scan or Fax Job
●
In addition to calling up the TX Job Log from the Address Book, you can also register destinations from the
TX Job Log of a scan or fax job to the Address Book.
Checking the Send and Save Status and Log of Scanned Data(P. 272)
Checking the Status and Log for Sent and Received Faxes(P. 304)
Basic Operations
159