Maintenance, Clean fixing assembly, Clean itb – Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 511: Clean feeder, Control condensation
[Maintenance]
84CU-0JU
Carry out maintenance to clean the machine and control condensation.
* Values in bold red text are the default settings for each item.
[Clean Fixing Assembly]
[Menu] [Adjustment/Maintenance] [Maintenance]
Perform this operation to clean the fixing assembly if black streaks appear on printed paper following procedures such
as toner cartridge replacement. Cleaning the Fixing Assembly(P. 599)
[Clean ITB]
[Menu] [Adjustment/Maintenance] [Maintenance]
If the printout is smudged, the transfer belt (ITB) inside the machine may be dirty. Perform this operation to clean the
transfer belt. Cleaning the Transfer Belt(P. 600)
[Clean Feeder]
[Menu] [Adjustment/Maintenance] [Maintenance]
If wiping and cleaning the feeder does not remedy the problems listed below, perform this operation to clean the
feeder. Cleaning the Feeder with Paper(P. 597)
●
Originals become dirty
●
Originals frequently jam
●
Printouts appear smudged after scanning, copying, or sending faxes
[Control Condensation]
[Menu] [Adjustment/Maintenance] [Maintenance]
In environments subject to sudden temperature changes, condensation may form and cause images and/or text to be
faint or blurred. If so, specifying [On] may improve the print results.
During condensation removal, a blank sheet of paper may be output without printing correctly. If you set this to [On],
you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The Auto Shutdown
Time setting is disabled.
Models with a fax function
[
Off
]
[On]
[
Use Fax Memory Lock
]
Settings Menu Items
501