Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 530)

[Layout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the gutter direction or margin and the print position.
[Binding Location]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Specify whether the gutter will be on the long edge or the short edge when the printed document will be
bound using a method such as staples.
Use this setting in conjunction with the [Gutter] setting to adjust the binding position and margins. [Gutter]
(P. 520)
● To bind the paper on the long edge, specify [Long Edge] in this setting.
● To bind the paper on the short edge, specify [Short Edge] in this setting.
[ Long Edge ]
[Short Edge]
[Gutter]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Offset the print position to adjust the width of the margin that will form the gutter.
Specify the offset width in 0.01" (0.5 mm) increments in the plus (+) or minus (-) offset direction, in accordance
with the edge specified in [Binding Location]. [Binding Location](P. 520)
If [Binding Location] is set to [Long Edge]
Specify the offset width by selecting a positive (+) value to bind on the left edge of the paper or a negative (-)
value to bind on the right edge.
Specified as a positive (+) value Specified as a negative (-) value
If [Binding Location] is set to [Short Edge]
Specify the offset width by selecting a positive (+) value to bind on the top edge of the paper or a negative (-)
value to bind on the bottom edge.
Specified as a positive (+) value Specified as a negative (-) value
-1.90 to 0.00 to +1.90 (inches) or -50.0 to 00.0 to +50.0 (mm)
Settings Menu Items
520