Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 87)

Registering LDAP Servers
84CU-06J
If you are using an LDAP server to search for destinations and perform authentication when sending data, register the
LDAP server information to the machine. You can register up to five LDAP servers each for searching and for
authentication.
Configure these settings using Remote UI from a computer. You cannot use the operation panel to configure the
settings.
Administrator privileges are required.
Required Preparations
● When specifying an LDAP server with a host name, make sure that a DNS server is available in the network.
● When specifying an LDAP server with an IP address, check whether the DNS server supports forward or
reverse lookup.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 438)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 441)
3
Click [LDAP Server Settings].
➠ The [LDAP Server Settings] screen is displayed.
4
Click [Register New Server] in [LDAP Server (For Search)] or [LDAP Server (For
Authentication)].
➠ The [Register New LDAP Server (For Search)] screen or [Register New LDAP Server (For Authentication)]
screen is displayed.
5
Set the server name and server address.
● In [Server Name], enter a name to identify the LDAP server.
● In [Server Address], enter the IP address or host name of the LDAP Server using single-byte alphanumeric
characters.
Input example: Host name
ldap.example.com
● Click [Check Connection] to check whether the machine can connect to the LDAP server.
6
Configure the start search position, TLS use, and port number, as needed.
[Position to Start Search]
Specify the start search position in the directory information tree (DIT).
● Add "DC=" to each dot-delimited character string in the Active Directory domain name, and separate the
entries with a comma.
Input example: When the domain name is "john.example.com"
Setting Up
77