Altera Transceiver PHY IP Core - Manual (Page 637)

XCVR_GT_TX_COMMON_ MODE_VOLTAGE
Pin Planner and Assignment Editor Name
GT Transmitter Common Mode Driver Voltage
Description
Transmitter common-mode driver voltage. This parameter is only for GT transceivers.
Note: Contact Altera for using this assignment.
Related Information
How to Contact Altera on page 21-42
XCVR_GT_TX_PRE_EMP_1ST_POST_TAP
Pin Planner and Assignment Editor Name
GT Transmitter Preemphasis First Post-Tap
Description
Specifies the first post-tap setting value. This parameter is only for GT transceivers.
Note: This parameter must be set in conjunction with
XCVR_GT_TX_PRE_EMP_PRE_TAP
. All combinations
of these settings are not legal. Refer to the Stratix V Device Datasheet for more information.
Options
• 0-31
• 5
Assign To
Pin - TX serial data
Related Information
Stratix V Device Datasheet
XCVR_GT_TX_PRE_EMP_ INV_PRE_TAP
Pin Planner and Assignment Editor Name
GT Transmitter Pre-emphasis Pre Tap Invert
Description
Inverts the transmitter pre-emphasis pre-tap. This parameter is only for GT transceivers.
Note: This parameter must be set in conjunction with
XCVR_GT_TX_PRE_EMP_PRE_TAP
. All combinations
of these settings are not legal. Refer to the Stratix V Device Datasheet for more information.
UG-01080
2015.01.19
XCVR_GT_TX_COMMON_ MODE_VOLTAGE 19-43
Analog Parameters Set Using QSF Assignments Altera Corporation
Send Feedback