Leprecon LP-3000 Series - Manual (Page 102)

98 Chapter Nine Moving Light Cue Playback
LP-3000 Users Manual
3. Using the Page edgewheel, select the desired page.
4. Using the Preset edgewheel, select the desired playback.
After you select the desired page and playback, the LP-3000 displays the list
of associated cues, their start delays, fade times and hold times.
5. Do one or more of the following:
To: Do:
Select a cue from the list. Use the Cue edgewheel.
Move a cue to a higher position
on the list. Click Move Up until the cue is in the
desired position.
Move a cue to a lower position
on the list. Click Move Down until the cue is in the
desired position.
6. When you are done, click Exit to ML Playback.
Converting a Moving Light Cuelist to a Chase
A unique feature of the LP-3000 will convert a Moving Light cuelist to a Moving
Light chase with a single button. This feature saves you from having to enter time
values for each step of a chase.