Leprecon LP-3000 Series - Manual (Page 66)

62 Chapter Five Chases
LP-3000 Users Manual
2. Using the Select edgewheel, activate the Chase column.
3. Click Add Chase.
NOTE: If the Chase column is not active, you will not see the Add Chase
button.
The LP-3000 displays the New Chase dialog box.
4. Enter a name for the chase or accept the default and click OK.
Default names follow the pattern CHASE_001, CHASE_002 and so forth.
To Add Steps to a Chase Using Faders
1. From the Main screen, click Chase.
The LP-3000 displays the Chase Builder screen.
2. Using the Chase edgewheel, select the chase to which you want to add
steps.
3. Using the Select edgewheel, activate either the Chase or Step column.
4. Using the manual scene faders or preset playback faders, set levels for the
step.
5. Click Snapshot.
The LP-3000 “records” the levels of the faders and creates a new step in the
chase.
6. Repeat steps 4 and 5 until all steps are recorded.