Leprecon LP-3000 Series - Manual (Page 109)

Advanced Moving Light Cue Programming Chapter Ten 105
LP-3000 Users Manual
Editing Moving Light Cues
Moving Light cues built on the LP-3000 can be edited at any time.
Editing Moving Light cues includes:
•
Adding a new cue to a show.
•
Deleting a cue from a show.
•
Editing the labels or attribute values of a cue.
•
Renaming a cue.
•
Adding a cue to insert in a cue list.
Fast Cue Editing
1. Move the key switch to the Unlock position.
2. Press the Edit button, located to the right of the key switch.
3. If you are not at the Programmer screen, from the Main screen, click ML
Program.
4. Use the Page edgewheel to select the desired page.
5. Press the Solo button of the desired playback to load the first cue assigned
to it.
6. If more than one cue is assigned to the playback (a cuelist), press the Add
button until the correct cue step is loaded in the Programming screen.
The Cue List will show the name of the cue that is loaded.
7. Edit the cue by selecting different labels or attribute values.
See To Set Cue Properties by Label beginning on page 90 for more
details.
8. When you are done editing the cue, click Save to save the new settings.
To Select a Cue for Editing
1. If you are not at the Programmer screen, from the Main screen, click ML
Program.
The LP-3000 displays the Programmer screen.
2. Click Cues.
The LP-3000 displays the Cues screen.