Leprecon LP-3000 Series - Manual (Page 89)

LP-3000 Users Manual
Chapter Eight:
Moving Light Cue Programming
The process of creating a Moving Light cue consists of the following steps:
1. Selecting fixtures.
In the selection process, you select individual fixtures and user- created
groups of fixtures for recording or editing.
2. Creating focus positions for the fixtures.
3. Setting Moving Light properties.
Use the Programming screen to set the color, beam, focus and intensity for
the selected fixtures.
4. Saving the cue.
Once the look is right, save the new cue.
Getting Started
Before you can work with moving lights, you must create a new show and assign
lights to it or open an existing show. For details, please see To Create a New Show
beginning on page 22, To Install a Conventional Fixture into the System
beginning on page 28, or To Open an Existing Show beginning on page 23.
1. From the Main screen, click ML Program.
The LP-3000 displays the Programmer screen.