Leprecon LP-3000 Series - Manual (Page 34)

30 Chapter Three System Tools
LP-3000 Users Manual
5. Use the Number to Add edgewheel to select the number of fixtures to add.
6. Click Select.
The LP-3000 displays the default assignment for the first fixture.
The LP-3000 places new HTP fixtures on DMX Line A starting with the first
available address. Three 48-channel dimmers are assigned to a show by
default. So the first available HTP address is 145.
For each fixture placed in the system, you have the opportunity to pick a
name, DMX line assignment and DMX start address for the fixture.
7. To override the default selections, move to the desired field (Name, Line or
Address) with the Next and Back buttons.
8. Using the LP-3000 keyboard, enter the desired values.
You can give each fixture in the system a Name that will help you identify it
during programming and playback. You can change the name now or, if you
accept the default name, you can update it later.
Line values can be A, B, C or D.
Start address values are between 1 and 512. If you select a start address
that is already in use or does not provide sufficient space for the fixture
(resulting in overlapping channel assignments), the LP-3000 displays a
message informing you that the address is unavailable.
9. When you are satisfied with your selections, click OK or OK All.