Leprecon LP-3000 Series - Manual (Page 26)

22 Chapter Two LP-3000 Show Basics
LP-3000 Users Manual
The LP-3000 displays the Show screen.
This screen displays the name of the show that is currently open, the active drive—
internal or floppy disk—and lists all the shows that are saved on the drive. In the
example shown above, the internal drive is displayed.
To Create a New Show
The button labeled New Show will create another show on the hard drive and
automatically open this new show. This new show will be empty; all presets,
chases, and stacks will contain zero values for channel levels.
1. From the Main screen, click Setup, Show and then New Show.
The LP-3000 displays the New Show dialog box.
2. Under Enter show name enter a name for the new show.
When naming new shows, some rules must be followed to create a valid
DOS file name.
•
Show names can contain 8 characters or less.
•
Show names cannot contain spaces.
•
Show names cannot contain punctuation marks or special
characters.
•
Show names can contain the underscore character.
User-entered show names that are not valid will be converted to valid file
names.
If you do not enter a name, the LP-3000 assigns the show a default name:
SHOW_001, SHOW_002 and so forth.