Leprecon LP-3000 Series - Manual (Page 129)

Creating New Labels Chapter Twelve 125
LP-3000 Users Manual
5. Use the Pan and Tilt edgewheels to point the fixture to the correct position.
You can also use the trackball to set pan and tilt. Click Use Trackball. Point
to the desired location on the “stage”. When you are done, click Use
Encoders or Save.
If you are working in offline mode, press the ENTER key on the keyboard.
6. Use the Focus edgewheel to set the beam edge of instruments that support
this feature.
7. When correctly focused, click Save.