Leprecon LP-3000 Series - Manual (Page 68)

64 Chapter Five Chases
LP-3000 Users Manual
4. Click Add Step.
The LP-3000 displays the New Step dialog box.
As an alternative to clicking Add Step, you can click Snapshot. This adds a
step to the chase using the default names 1.00, 2.00 and so forth.
5. Enter a number for the step or accept the default and click OK.
Step numbers include two decimal places. This makes it easy to insert a
step between two existing steps. For instance, if you wanted to insert a new
step between steps 2.00 and 3.00, you could give it the number 2.50.
6. Repeat steps 4 and 5 for each step you want to add to the chase.
To Assign Levels to Steps Manually (Off-line Mode)
1. From the Main screen, click Chase.
The LP-3000 displays the Chase Builder screen.
2. Using the Chase edgewheel, select the chase for which you want to assign
step levels.
The LP-3000 displays a list of all the steps that are part of the chase.
3. Using the Select edgewheel, activate the Step column.
The text on the menu buttons changes, indicating that you are ready to work
with steps.
4. Using the Step edgewheel, select a step.