Leprecon LP-3000 Series - Manual (Page 92)

88 Chapter Eight Moving Light Cue Programming
LP-3000 Users Manual
To: Do:
Move all instruments from
the Instruments in Cue
list to the Instruments
Available list. Click Deselect All.
Move all instruments from
the Instruments Available
list to the Instruments in
Cue list. Click Select All.
4. When you are done, click Exit to Programmer.
Instrument Groups
One way to streamline cue programming is to program fixtures as a group. For
example, you may have a group of lights for the drummer, a group of lights for the
right side of the stage and a group of lights for the left side of the stage.
To simplify programming, groups should consist of instruments of the same type.
To Create an Instrument Group
1. From the ML Programmer screen, click Instruments.
The LP-3000 displays the Instruments screen.
2. Move only the instruments that should be included in the group to the
Instruments in Cue list.
3. Click Save as Group.
The LP-3000 displays the New Group dialog box.
4. Use the keyboard to enter a name for the group or accept the default.
Default names follow the pattern Group_001, Group_002 and so forth.
5. Click OK.
The new group appears in the Groups of Instruments list.
To Edit an Instrument Group
1. From the ML Programmer screen, click Instruments.
The LP-3000 displays the Instruments screen.
2. Do one of the following: