Leprecon LP-3000 Series - Manual (Page 11)

LP-3000 Users Manual
Introduction
Congratulations on your purchase of the LP-3000 Console. The LP-3000 was
designed to fill the need for an entertainment console with strong moving light
capabilities. The LP-3000 was specifically engineered to control both conventional
and moving lights gracefully.
About This Manual
The LP-3000 Users Manual is intended to familiarize the operator with the features
of the LP-3000 and provide detailed instructions about its use. The manual is
divided into three sections.
•
Getting Started: In this section we introduce the LP-3000 and quickly get
you up and running. We also provide important information to help you
configure the LP-3000 and we describe the various tools and techniques
that you will use routinely—with both the conventional and moving light
controllers.
•
Conventional Light Controller: After you familiarize yourself with the LP-
3000, you will be ready to learn about the conventional light controller. In this
section we walk you through the procedures that you will use—from the
most commonly used techniques to specialized techniques that apply to
unique programming situations.
•
Moving Light Controller: Finally, we describe the procedures that you will use
to operate the moving light controller. It is important that you are fully familiar
with the LP-3000 prior to using the moving light controller. A thorough study
of the Getting Started section is required and some experience with the
conventional light controller is recommended.
After the major sections of the manual, you’ll find several appendices.
•
Appendix A contains important maintenance information.
•
Appendix B describes the instruments in the LP-3000 instrument library.
•
Appendix C provides step-by-step instructions about adding a moving light
fixture into the LP-3000 library.
•
Appendix D describes control features—features of some lights that enable
you to reset, douse, etc. from the LP-3000 console.