Leprecon LP-3000 Series - Manual (Page 17)

Manual Console Operation Chapter One 13
LP-3000 Users Manual
2. Click Shutdown to shut down the LP-3000.
If you want to restart the LP-3000 rather than shut it down, click Reboot.
If you have changed your mind, click Cancel.
3. Move the power switch to the Off position.
I MPORTANT : Y OU MUST SHUT DOWN THE LP-3000
PROGRAM BEFORE TURNING OFF THE POWER SWITCH .
LP-3000 Controls for Manual Operation
There are two modes of manual operation of the LP-3000.
•
In Two-Scene Preset mode, the LP-3000 provides two rows of faders (X
and Y). While the scene on row X is visible, you set up the next scene on
row Y. On cue, you fade the Y scene up and the X scene down. Then with
the scene on row Y visible, you set up the next scene on row X. You
alternate fading from scene to scene in this fashion to create a show.
•
In Wide mode, the LP-3000 functions as a single-scene console. The X and
Y rows of faders act as one bank, doubling the manual channel capacity.
The following controls are the ones you will use when you operate the LP-3000
manually.