Leprecon LP-3000 Series - Manual (Page 45)

System Tools Chapter Three 41
LP-3000 Users Manual
The LP-3000 displays the Copy Patch dialog box.
5. Accept the default name or use the keyboard to enter a new name.
Default names follow the pattern PATCH_001, PATCH_002 and so forth.
6. Click OK.
Options
Several controls for the LP-3000 are located on the Options screen.
1. From the Main screen, click Setup and then Options.
The LP-3000 displays the Options screen.
•
Default Add and Solo levels for the Bump buttons are located on the
left side of the screen.
•
The LCD contrast control for the master and preset panels is located
just below.
•
The View by radio buttons below the contrast set the Stage View
(Main) screen display for percentage or DMX values.
•
If questions arise regarding the features or operation of the LP-3000,
the software revision numbers shown at the top of the screen and
the Show Version and Library Version displayed in the lower left
corner of the screen will give Leprecon Technical Support valuable
information about your board. Please have this information available
when requesting technical assistance.