Leprecon LP-3000 Series - Manual (Page 44)

40 Chapter Three System Tools
LP-3000 Users Manual
5. Use the Line edgewheel to change the line number at any time—either
before or after the dimmers are chosen.
6. When you have finished editing the patch, click Add.
7. Repeat steps 1 through 6 for each dimmer you want to patch.
8. When you are done creating the custom patch, click Save & Exit to keep
the result and close the Edit Patch screen.
To discard the changes, click Cancel & Exit. The patch will remain
unchanged.
To Build a Custom Patch by Dimmer
The editing screen changes when you are viewing the patch by Dimmer. Editing by
dimmer is a very fast way to set a few dimmers individually.
When choosing View by Dimmers and clicking the Edit button, the LP-3000
displays the Dimmer Patch dialog.
1. Use the Dimmer edgewheel to select a dimmer
2. Use the Line edgewheel to select a line for the fixture.
3. Use the Level edgewheel to set the level for the dimmer.
4. Use the Channel edgewheel to change channels.
5. Click Apply to update the patch.
6. Repeat steps 1 through 5 for each dimmer you want to patch.
7. Click Exit when you are finished.
To Copy a Patch
The patches in the LP-3000 can be copied. This allows a custom patch to be
duplicated and then modified.
1. From the Main screen, click Setup and then Dimmer Patch.
The LP-3000 displays the Dimmer Patch screen.
2. Click Select Patch.
3. Using the Modify edgewheel, select a patch to copy.
4. Click Copy.