Editing chases – Leprecon LP-3000 Series User Manual
Page 70
66
Chapter Five
Chases
LP-3000 Users Manual
Several channels selected for editing:
12.
Using the Modify edgewheel, adjust the level for the channel or channels.
13.
When the level is correct, click At Level a second time.
This restores the marked block to a normal background and allows more
channels to be selected.
14.
Repeat steps 7 through 13 for all channels that you want to edit.
15.
Click Save to save the changes.
16.
Click Discard to delete the changes and restore the settings to their original
values.
17.
If desired, select another step and set levels for it.
18.
When you are done, click Exit to Main.
To Play Back a Step Editor Chase
Playing back a chase that was created in Step Edit mode is identical to playing back
a chase that was built using the Chase Builder in its conventional fashion.
For details, see To Assign the Chase to a Playback beginning on page 63.
Editing Chases
Regardless of which method you used to create your chase, the LP-3000 provides
common editing features that enable you to:
•
Change the number of steps in a chase.